TM 11-7025-210-23
4-57. REMOVE/REPLACE PRINT BELT
INITIAL SETUP
Common Tools
Special Tools
Tool kit
1-1/2 in. 10/32
Remove
1.
Access line printer (para 4-18, steps 1-6).
2.
Remove rebound belt (para 4-52).
3.
Install 1-1/2 in. 10-32 screw as shown.
4.
Tighten screw all the way. Belt will loosen.
CAUTION
Do not use pressure on type fingers. They bend
easily.
5.
With two fingers grasp center of belt as shown.
4-141
