TM 11-7025-210-23
4-58. LUBRICATE PRINT BELT
INITIAL SETUP
Common Tools
Materials/Spare Parts
Tool kit
Graphite solution
MS122 aerosol dry lubricant
Clean, dry, lint-free cloth
Small-bristle paint brush
Remove
1. Remove print belt (para 4-57).
CAUTION
Use no chemicals when cleaning print belt.
They will damage print belt.
2. Thoroughly clean belt with a clean, dry, lint-free
cloth.
3. Coat belt surface with graphite solution using small,
bristle paint brush. Also, coat spaces between
fingers and belt.
Replace
1. Replace print belt (para 4-57).
2. With print belt running, spray the inside of the belt
with MS122 aerosol dry lubricant near right print belt
pulley directed at guide rib for 1-2 seconds.
4-144
