TM 11-7025-210-23
4-57. REMOVE/REPLACE PRINT BELT (CONT)
3. Push inner belt guide rib into bottom groove of
CAUTION
Make sure that type fingers are set
completely inside opening in front of
photocell.
Otherwise, photocell will be
damaged.
4. Check that type fingers are set completely inside
opening in front of photocell.
5. Check bottom of type fingers all around belt to make
sure that they are positioned properly.
6. Loosen screw all the way. Belt will fully tighten.
7. Remove screw.
8. Replace rebound belt (para 4-52).
4-143
