TM 11-7025-210-23
4-61.
REMOVE/REPLACE PLATEN DRIVE GEAR
INITIAL SETUP
Common Tools
Material/Spare Parts
Lubriplate #630-AAME-D6A3 grease
Tool kit
Remove
1.
Access line printer (para 4-18).
2.
Remove jackshaft (para 4-38, Remove, steps 3-
11).
3.
Slide jackshaft in direction shown until linefeed
clutch is out of way.
4.
Slip off VFU drive belt.
5.
Remove retaining rings from gears.
6.
Pull gears off posts.
Replace
1.
Coat gears lightly with grease.
2.
Push gears on posts.
3.
Push retaining rings onto gears.
4.
Slip on VFU drive belt.
5.
Slide jackshaft in direction shown.
6.
Replace jackshaft (para 4-38, steps 2-20).
4-149
