TM 11-7025-210-23
4-62.
REMOVE/REPLACE POWER SUPPLY ASSEMBLY (CONT)
Replace
1.
Make sure all wires are clear of power supply.
2.
Lower power supply into frame.
3.
Replace rear cooling fan (para 4-30).
CAUTION
Overtightening will twist off screw heads.
4.
Insert four screws in base of power supply.
Tighten.
5.
Insert screw and washers securing grounding
cables. Tighten.
6.
Connect leads to motor start capacitor. Red
lead to connector marked in red. Black and
blue leads to rear terminal.
4-152
