TM 11-7025-210-23
4-64.
REMOVE/REPLACE POWER SUPPLY CAPACITORS AND REACTOR
INITIAL SETUP
Common Tools
Materials/Spare Parts
Tool kit
Tags
Pen or pencil
Tie wraps
Remove
1.
Access line printer (para 4-18).
NOTE
If you are removing only one
component, do only the steps
for removal of that component:
C1 capacitor (steps 2-6)
Motor start capacitor (steps 7-10)
L1 reactor (steps 11-16)
WARNING
Capacitor may contain dangerously
high voltage.
2.
Ground capacitor.
3.
Tag wires, then remove screws, washers, and
wires.
4.
Cut tie wrap.
5.
Loosen screw, washer, and nut in mounting
bracket.
6.
Lift out capacitor.
4-156
