TM 11-7025-210-23
4-62.
REMOVE/REPLACE POWER SUPPLY ASSEMBLY (CONT)
7.
Connect wires to XPS board, and install tie
wraps.
a. Two white TRANSFORMER wires.
Non-
polarized.
b.
Two black FAN wires. Non-polarized.
c. Four MOTOR wires. Connect one black
and one yellow wire to rear lead. Connect two
black wires to front lead.
d.
P5 to J5. Six white, two black wires.
e.
P6 to J6. Orange wires.
f.
Linefeed solenoid.
g.
Capacitor wires. One white, one blue.
h.
P3 to J3. Six white wires.
i.
Ac cable input.
8.
Close up line printer (para 4-18).
9.
Place hand near rear fan assembly.
If air blows, go to step 10
If not, access XPS board. Check
wire connections in step 7
10.
On control panel, press TEST button.
4-153
