TM 11-7025-210-23
4-38.
REMOVE/REPLACE JACKSHAFT AND LINEFEED CLUTCH
INITIAL SETUP
Common Tools
Tool kit
NOTE
Line printer may be mounted to wall and
floor. If your printer is mounted this way, see
your system manual for removal procedure.
Remove
1.
Pull line printer away from wall.
2.
Access line printer (para 4-18).
3.
Remove right drive belt (para 4-32, steps 2-4).
4.
Loosen two set screws on right jackshaft pulley.
5.
Take off pulley.
6.
Remove left drive belt (para 4-33,
Remove
steps 2-5).
7.
Loosen two set screws on left jackshaft pulley.
8.
Take off pulley.
9.
Remove slew strobe assembly (para 4-41, steps
2-5).
4-83
