TM 11-7025-210-23
4-39.
REMOVE/REPLACE JACKSHAFT BEARINGS (CONT)
7.
Insert 1/8 in. pin punch into bearing housing
until it is positioned firmly on ridge of bearing.
8.
Tap punch with hammer until bearing drops out
of housing.
Replace
NOTE
The left bearing is longer than the right
bearing.
If you are replacing only one
bearing do only the steps required:
Right jackshaft bearing (steps 1-5)
Left jackshaft bearing (steps 6-12)
1.
Coat outside surface of bearing lightly with
thread interlock compound.
2.
Push bearing a short distance into bearing
housing.
4-88
