TM 11-7025-210-23
INITIAL SETUP
Common Tools
Special Tools
Materials/Spare Parts
Tool Kit
Bearing puller tool
Thread locking compound
Small-bristle brush or cotton swab
Remove
NOTE
If you are removing only one bearing do
only the steps required:
Right jackshaft bearing (steps 1-3)
Left jackshaft bearing (steps 4-8)
1.
Remove jackshaft and linefeed clutch (para 4-
2.
Hold bearing puller bolt steady with hex wrench.
3.
Turn bearing puller block with adjusted wrench
until bearing comes out of housing.
4.
Remove jackshaft and linefeed clutch (para 4-
5.
steps 4-6).
6.
Remove spring from bearing housing.
4-87