TM 11-7025-210-23
4-56. ADJUST MAGNETIC BELT GUIDE AND REBOUND BAR
INITIAL SETUP
Common Tools
Special Tools
Test, Measurement and
Personnel
Tool kit
1-1/2 in.
Diagnostic Equipment
Required
10-32 screw
Height alinement gauge
Two
1.
Access line printer (para 4-18, steps 1-6).
2.
Install and turn 1-1/2 in. 10-32 screw as shown.
Stop turning as soon as print belt begins to
loosen.
3.
Note and mark length of 10-32 screw stem.
4.
Remove print belt (para 4-57).
4-136
