TM 11-7025-210-23
4-54. REMOVE/REPLACE RIGHT PULLEY SHAFT BEARINGS
INITIAL SETUP
Common Tools
Tool kit
Remove
1.
Remove print belt (para 4-57).
2.
Remove grip ring.
3.
Pull off spring washer.
4.
Slide pulley off shaft.
CAUTION
Remove shims carefully. Keep them
in order.
5.
Remove shims.
6.
To remove bottom bearing, push thin hex key
wrench through top of pulley until it touches
bearing.
7.
Gently tap on wrench until bearing drops out of
pulley.
8.
To remove other bearing, turn pulley over and
repeat steps 6 and 7.
9.
To remove tension spring, push in tension
support casting enough to slip spring out of arm
assembly.
10.
Pull off spring.
4-133
