TM 11-7025-210-23
4-53. REMOVE/REPLACE LEFT PULLEY SHAFT BEARINGS (CONT)
5.
Place 7/16 in. box wrench over nut. Tap with
hammer until loose.
6.
Using box wrench, loosen and remove nut.
7.
Loosen set screw until pulley is loose.
8.
Pull pulley from shaft.
CAUTION
Remove shims carefully. Keep them
in order.
9.
Remove shims.
10.
Remove three screws holding plate and gear
assembly.
11.
Pull off plate and gear assembly.
4-128
