TM 11-7025-210-23
3-15.
CLEAN PHOTOCELL
INITIAL SETUP
Common Tools
Tool kit
1.
Power OFF printer. Pull ac plug from outlet.
2.
Open cover.
3.
Remove paper.
4.
Remove ribbon cartridge.
5.
Remove platen (para 3-14).
6.
Locate photocell.
7.
Using blower-squeeze ball, blow air here.
8.
Replace platen (para 3-14).
9.
Replace ribbon cartridge.
10.
Install paper.
11.
Close cover.
12.
Push ac plug into outlet. Power ON.
13.
On control panel, press TEST button.
3-14
