TM 5-3610-295-13&P-2
5-11. MAIN POWER RECEPTACLE ASSEMBLY. - Continued
b.
Replace. - Continued
(2)
Remove door and cover assembly (2) from main power service assembly by removing attaching
screws (1). (See Figure 5-4.)
(3)
Tag and unsolder four main electrical wires of main power service assembly from terminals. Remove
conduit nut (4, Figure 5-2), conduit bushing (5) and wiring clamps as necessary.
(4)
Remove nuts (1, Figure 5-3), lockwashers (2), flat washers (3), and screws (4) from main power
receptacle.
(5)
Remove cap (5), receptacle (6), and gasket (7) from recessed receptacle box.
(6)
Remove rivets (8) from recessed receptacle box by drilling or chiseling off heads.
Figure 5-3. Main Power Cable Receptacle Assembly (Outside Shelter)
5-14
