TM 5-3610-293-13&P
4-27. PHASE MONITOR METER. - Continued
(2)
Tag and unsolder wires (11) from the phase indicator lights (13), and only the top row of wires
(14) from the phase test switch (17).
(3)
Remove screws (30), lockwashers (31), and circuit board (32).
(4)
Remove screws (33), lockwashers (34), and stand offs (35) from circuit board (32).
(5)
Secure stand offs (35) to replacement circuit board (32) with lockwashers (34) and screws (33).
(6)
Position stand offs (35) and secure with lockwashers (31) and screws (30).
NOTE
Use wire color code to tag wires on the new circuit board the same as on the old
circuit board.
(7)
Solder wires (11) and only the top row of wires (14) on replacement circuit board (32) to phase
indicator lights (13) and phase test switch (17).
(8)
Attach phase monitor meter (1) to shelter wall by securing flat washers (4), lockwashers (3), and
screws (2).
(9)
Turn on power and test operation.
4-28. RIFLE RACK ASSEMBLY. Refer to figure 4-35 for location of components and hardware of rifle rack assembly.
This task covers: Repair
INITIAL SETUP
Tools
General Mechanics Automotive Tool Kit, Appendix B
Materials
RTV Adhesive, 33, Appendix B
4-88