TM 5-3610-293-13&P
4-28. RIFLE RACK ASSEMBLY. - Continued
(2)
Apply adhesive (Appendix E, item 33) to bottom of replacement rubber mat (10), and position on
lower plate (11).
(3)
Secure lower rifle guide (9), rubber mat (10), and lower plate (11) with screws (8).
4-29. BLACKOUT BUZZER ASSEMBLY. Refer to Figure 4-36 for location of blackout buzzer assembly components
and hardware.
This task covers: Repair
INITIAL SETUP
Tools
General Mechanics Automotive Tool Kit, Appendix B
Materials
None
WARNING
High voltage exists in the electrical system of this equipment. DEATH on contact may
result if personnel fail to observe safety precautions.
a.
Repair by replacing blackout switch.
(1)
Shut off ceiling light breaker (1) on power distribution panel (2).
(2)
Remove screws (3), lockwashers (4), flat washers (5), and switch plate (6).
(3)
Tag and unsolder wires (7) from blackout switch (8).
(4)
Remove nut (9) and blackout switch (8).
(5)
Position replacement blackout switch (8) and secure with nut (9).
(6)
Solder wires (7) on blackout switch (8) and remove tags.
(7)
Position switch plate (6) and secure with flat washers (5), lockwashers (4), and screws (3).
4-91
