TM 5-3610-293-13&P
SECTION VI. UNIT MAINTENANCE PROCEDURES
4-11.
GENERAL. This section contains unit maintenance procedures. Perform all preventive maintenance and
operator maintenance before performing unit maintenance procedures. Numbers in parenthesis ( ) after component or
item discussed in paragraphs below refer to callouts in corresponding figures.
4-12.
ISLATROL CONTROL BOX ASSEMBLY. Refer to figure 4-1 for location of components and hardware of
islatrol control box assembly.
This task covers:
a.
Test
b.
Replace
INITIAL SETUP
Tools
General Mechanics Automotive Tool Kit, Appendix B
Electrical Equipment Tool Kit, Appendix B
Multimeter, Appendix B
Materials
None
WARNING
High voltage exists in the electrical system of this equipment. DEATH on
contact may result if personnel fail to observe safety precautions.
a. Test.
(1)
Place printing press circuit breaker on power distribution panel in OFF position.
(2)
Open control box door cover (1) to expose wiring (2).
(3)
Place printing press circuit breaker on power distribution panel in ON position.
4-21
