TM 5-3610-293-13&P
4-10.
UNIT TROUBLESHOOTING. - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7k. Sink assembly is leaking.
Step 1.
Turn off power to sink assembly.
Step 2.
Find location of leak.
If leak occurs at a joint, tighten joint with pipe wrench. If leak occurs in a pipe or in a welded joint, replace
sink assembly and return old sink assembly to depot for repair.
8.
PASSAGEWAY TENT DOES NOT OPERATE PROPERLY.
Step 1.
Refer to TM 10-5411-201-11 for repair procedures for the complexing kit.
9.
ISO SHELTER DOES NOT OPERATE PROPERLY.
Step 1.
Refer to TM 10-5411-200-14 for repair procedures for the ISO shelter.
10.
PHASE MONITOR METER DOES NOT OPERATE PROPERLY.
Step 1.
Remove fuse and test for continuity. Reading should be zero ohms.
Replace fuse.
Step 2.
Check voltage meter.
Replace voltage meter. (Refer to paragraph 4-27a.)
Step 1.
Check frequency meter.
Replace frequency meter. (Refer to paragraph 4-27e.)
4-18
