TM 11-7025-210-23
has a connector cable and plug for connection to the main Vertical Tab (VT), Form Feed (FF), and VFU cable assemblies.
The slew strobe assembly is activated when appropriate paper slew commands are received from a data source such as
the vertical format unit.
figure 2-10. Slew Strobe Assembly Paper Advance
(4)
The vertical format unit (VFU) provides preprogrammed linefeed data to the slew strobe
assembly. It is a data source (fig. 2-11) for the slew strobe assembly. The data punched on the VFU tape is read by the
detector assembly. The data is sent by the VFU cable to the mother board (LMB/16) and the TVFC/1 board. The slew
strobe assembly then advances paper to positions determined on the VFU tape.
Figure 2-11. Slew Strobe Data Source
2-8
