TM 11-7025-210-23
Figure 2-8. Normal Linefeed Components
(2) When a line feed is selected, the linefeed solenoid (fig. 2-9) is energized with + 25 volts for 12.5
milliseconds. This pulls the linefeed solenoid arm away from the cam and allows the clutch to rotate 1/4 of a revolution.
This causes gears connected to the linefeed drive gear to advance the paper one line.
Figure 2-9. Linefeed Operation
(3) The paper is advanced rapidly (slewed) by the slew strobe assembly (fig. 2-10). This assembly consists
of a strobe disc attached to the right side of the linefeed clutch and a strobe detector bracket-mounted to the left side
frame. The strobe detector contains a small printed wire board called the TVFC/1 board. It
2-7
