the flash unit battery will accommodate without
being recharged.
a. Check to see that the charger voltage selector on
the AC charge unit is in the 120V position.
b. Plug the charge cord into the AC/charge recep-
tacle (fig. 2-4) on the flash unit.
c. Plug the AC charge unit into an AC receptacle.
2-15.
NOTE
Use the angle finder for copy work, closeup
photography, or for photographing a subject from
a low angle.
viewfinder eyepiece ring (fig. 2-1).
b. Screw the angle finder onto the viewfinder
eyepiece.
c. Turn the angle finder until the knurled collar
NOTE
What you see through the angle finder is exactly
what you would see if you were looking directly
through the viewfinder. You can turn it clockwise
to any position.
d. To take off the angle finder, turn the knurled
collar (fig. 2-12) on the angle finder counterclockwise
until it comes off.
e. Put the ring back on the viewfinder.
