Figure 6. Packaging diagram.
11. Installation
a. Place a stand, table, or other sturdy, level support Where the
projector is to be used (par. 13). The stand furnished with some
of the PH-637A/PFP's is approximately 18 inches high and is
designed so that the projector can be used while the operator is in a
sitting position (par. 5g). If the operator is to stand, the stand or
table used should be approximately 28 inches high. The projection
distance necessary to obtain a specific size screen image is indicated
in the following table.
13
TAGO 4738B
