4. Table of Components
(figs. 2, 3, and 4)
Carrying case:
1
23
15
26
25
PH-637/PFP-------------------
25
17
17
29
PH-637A/PFP-----------------
1
Housing:
14
21
PH-637/PFP-----------------
13
23
13
14
24
PH-637A/PFP (including roll attach-
ment).
24
9
8
6
1
Projection head assembly- - - - - - - - - - - -
7
7
3
Projection lamp a - - - - - - - - - - - - - - - - - - -
3
13
4
1
1
Roll attachment (PH-637/PFP only)- - - - - - -
1
5
1/8
4
Lens cap- - - - - - - - - - - - - - - - - -
1
2
1
24
2
Support post- - - - - - - - - - - - - - -- -
12
18
1
20
Projector stand b - - - - - - - - - - - - - - -
10
2
2
Cellophane or plastic c- - - - - - - - - - - - - - - -
12
1
11 5/8
Aperture plate holder - - - - - - - - - - - - - -
Aperture plates:
10
10
1 of 3 11/16" x 4 5/8" aperture- - - - - -
10
10
1 of 4/11/16 " x 6 5/8" aperture- - - - - - -
10
10
1 of 6 11/16" x 8 11/16" aperture- - - - - - - -
1 of 711/16" x 9 11/16 " aperture (PH-
11 5/8
12
637A/PFP only).
7
2
1
Power cable- - - - - - - - - - - - - - - - - - - - -
8
1
3
1/8
5
Lens tissue - - - - - - - - - - - - - - - - - - - - - - - - -
5
(pack-
ages)
a. One 500-watt lamp furnished with the PH-637/PFP; five 1,000-watt lamps furnished with the PH-
637A/PFP.
b. Furnished only with some procurements of the PH-637A/PFP.
c One roll furnished with the PH-637/PFP; two rolls furnished with the PH-637A/PFP.
5. Description of Components
(figs. 2, 3, 4, and 5)
a. Housing. The housing is made of black, crackle-finish, riveted,
sheet aluminum. Two collapsible shelves are provided for the PH-
637/PFP; one at the front is used as an arm rest, and one at the left
side is used to hold copy, notes, and other lecture materials. The
PH-637A/PFP has a collapsible shelf at the left side and a hinged
projection-stage cover that extends out over the front of the projector
to form a shelf. A door at the rear, held in the closed position by a
knurled captive screw, opens to expose a reflector and projection lamp.
A similar door on the left side gives access to a glass condenser lens,
4
TACO
4738B
