Figure 29.2. Projector, Still Picture PH--637B/PFP with bottom removed. (Added)
Add subparagraph i.1 after subparagraph i:
i .1. Rear Surface Mirror and Mirror Support, (PH-637B/PFP).
(1) Remove the projection stage plate glass cover and the Fresnel
condensing lens (b above).
(2) Remove the clips that hold the rear surface mirror (fig. 24) in
position. Carefully lift the rear surface mirror free.
(3) To remove the rear surface mirror support, take out the mirror
mounting screws and washers (fig. 29.1) and the mirror ad-
justing screws and washers. Lift out the rear surface mirror
support.
(4) To replace the rear surface mirror support and mirror, reverse
the disassembly instructions given in (1), (2), and (3) above.
Whenever the rear surface mirror or rear surface mirror support
is moved, the rear surface mirror must be realigned (par. 59 d (2)).
Subparagraph j, line 1. After "a glide" add : on the PH-637/PFP
and the PH-637A/PFP
Last sentence. Add the following after the last sentence: To remove
the glide on the PH-637B/PFP, unscrew the glide counterclock-
wise.
12
