Figure 15. Projector housing, undercarriage
removed, bottom view.
(3) To remove the mirror frame assembly, first remove the three
mirror adjusing buttons mounted in the back of the housing
(fig. 1). Then turn the three from surface mirror adjusting
nuts couterclockwise until they disengage the mirror adjust-
ing screws mounted on the mirror frame. Carefully lift tthe
mirror frame assembly out of the projector housing.
(4) To replace (he front surface mirror and mirror frame as-
sembly, reverse the disassembly instructions given in Subpara-
graphs (1) through (3) above.
h. Lamp Socket (fig.
1 5 ) .
(2) To remove the lamp socket, remove the two screws (fig. 15)
that hold the socket to the reflector assembly frame. Remove
the fiber insulator from the bottom of the socket. Loosen
the two terminal screws that hold the wires to the socket,
release the wires, and lift the socket out of the housing.