TM 5-3610-220-14
CHAPTER 4
ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. SERVICE UPON RECEIPT OF MATERIAL
and installation of the camera are given in chapter
4-1. General
Complete instructions for the servicing, inspection
Section II. MOVEMENT TO A NEW WORKSITE
4-3. Reinstallation After Movement
4-2. General
Reinstallation instructions are identical to the initial servicing,
Complete instructions for dismantling the equipment and
inspection and installation instructions given in chapter 2,
preparation for transportation to a new worksite are given in
section II of chapter 2.
Section III. REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
The operations detailed in this chapter may be
4-4. Tools and equipment
performed with standard mechanics handtools.
Tools, equipment, and repair parts issued with or authorized
for the Consolidated model 1969, camera copying,
lithographic, are listed in the basic issue items list, appendix
4-6. Maintenance Repair Parts
C.
Repair parts and equipment are listed and illustrated in the
repair parts and special tools list covering organizational
maintenance in TM 5-3610-220-20P.
4-5. Special Tools and Equipment
Section IV. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
organizational maintenance personnel, with the aid of an
4-7. General
operator at monthly intervals. The monthly interval will be
Preventive maintenance checks and services should be
equivalent to 4 weeks, or 240 hours of use, whichever occurs
performed regularly by the organizational maintenance
first. Table 4-1 contains a tabulated listing of organizational
personnel to insure good operation and lessen the chances of
preventive maintenance checks and services.
mechanical failure.
4-8. Organizational Maintenance
Organizational preventive maintenance is performed by
4-1
