TM 11-7025-232-10
INITIAL SETUP
M a t e r i a l s / S p a r e Parts
Isopropyl alcohol
Clean,
lint-free
cloth
1. Remove paper (para 2-8, Remove,
s t e p s 1-8).
2. Power OFF printer (para 2-7).
3. Open cover on left sprocket.
WARNING
I s o p r o p y l alcohol is flammable. Do
not use near high heat or open flame.
4 . Dampen lint-free cloth with alcohol.
5. Locate paper motion sensor under
l e f t sprocket. Wipe clean.
6. Dry sensor with clean, dry,
lint-free cloth.
7 . Install paper (para 2-8).
3 - 2 1 / ( 3 - 2 2 blank)
