TM 11-7025-210-23
4-34.
LUBRICATE LINEFEED IDLER GEAR
INITIAL SETUP
Common Tools
Material/Spare Parts
Tool kit
Clean lint-free cloth
SAE 10W-20W-40 motor oil
Lubriplate #630-AAME-D6A3 grease
.
Remove
1.
Access line printer (para 4-18, steps 1-6).
2.
Remove retaining ring.
3.
Slide off idler gear.
4.
Wipe inside clean and check for scoring
(scratching). If steel sleeve is scored, replace
idler gear.
5.
Apply two drops of oil to bearing.
6.
Wipe gear shaft clean and coat with , grease.
Replace
1.
Slide idler gear on shaft.
2.
Replace retaining ring.
3.
Close up line printer (para 4-18, steps 3-8).
4.
On control panel, press TEST button.
4-70
