TM 11-7025-210-23
Table 3-1 . Organizational Preventive Maintenance Checks
and Services Semiannual Schedule -- Continued
Item
Item To Be
Equipment Will Be
No.
Inspected
Procedures
Reported Not Ready/
Available if
13
Motor
Lubricate motor in the oil
Motor drive shaft
hole on both ends of motor
turns with loud
as follows:
noise.
1. Locate right oil hole
on top of motor casting
between and at the base
of the double flanges.
2. From inside of right
frame extend spout of
oil can down to oil hole.
3. Apply two drops of oil.
4. Using flexible mirror,
locate left oil hole. It
is also on top of motor
casting and at the base of
the double flanges.
5. Bend spout of oil can
inwards and extend in to
oil hole.
6. Apply two drops of oil.
14
Power Supply
Check power supply for loose
or broken parts, chafed or
frayed wires, loose connec-
tions, and loose tie wraps or
cable clamps.
15
Line Printer
Clean interior of line printer
Interior
as follows:
CAUTION
Be careful with printed wire
boards when cleaning line
printer interior. They are
easily damaged.
1. Vacuum up dust from
interior of printer.
3-8
