TM 11-6730-235-35
Section III. REMOVAL, REPLACEMENT, AND ALIGNMENT
3-5. Removal of lens Head Assembly
a. Remove the two screws (1) that secure the
lens head assembly (2) to the arm of the arm and
post assembly (4).
CAUTION
Hold the lens head securely during the
removal procedure to prevent its dropping
and possibly breaking the stage glass of the
b. Slide the lens head assembly (2) off the arm
top plate assembly.
of the arm and post assembly (4).
ScrewsH1
1.
5.
A3MP1H3
8. Top plate assembly A3
11. Washers A7H3
2.
Lens head assembly Al
6. Rivet A3MP1H1
9. Screws A7H1
12. Roll attachments A7
3.
Screws A2H1
7. Hinge pin (p/o A3MP7)
10. Wingnuts A7H2
13. Case assembly A6
4.
Arm and post assembly A2
Figure 3-2. Projector, exploded view.
3-4
