Table 3-2. Troubleshooting Cont.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. VIEWFINDER AREA IS CIRCULAR AND DOES
NOT FOCUS PROPERLY.
Check to see that viewfinder screen was installed af-
ter cleaning.
Put viewfinder screen in correct position.
3. NO EXPOSURE.
Step 1. Check to see that film is properly loaded in
camera.
Step 2. Check to see that film is not defective.
Use good quality film.
4. IMPROPER EXPOSURE.
Step 1. Check camera battery.
If battery condition indication is low,
replace battery.
Step 2. Check to see that film speed dial setting
matches rating of film loaded in camera.
5. FILM WILL NOT ADVANCE.
Step 1. Check to see that film is properly loaded in
camera.
Step 2. Check to see that film is not past last ex-
posure.
If film is past last exposure, rewind
film.
Step s. Check cartridge spool.
If spool does not rotate, obtain a new
cartridge and load the camera.
3-8