TM 11-6720-248-12
Check the camera set daily; remove corrosion, fungus,
stored, wipe all exposed metal parts, except the camera,
mites, and mold. Wipe all exposed metal parts, except
with a cloth moistened with oil (FED VV-L-800). To
the camera, with a cloth moistened with Lubricating Oil,
remove condensation, allow the equipment to warm to
General Purpose (FED VVL-800) (FSN 9150-273-2389).
room temperature (para 3-9b) and then wipe with a
Store the camera set in a well ventilated area and air the
clean, dry cloth before using it. After the camera set has
carrying case daily. Do not leave film in the camera
been used in rainy, dusty, or dirty regions, it may need
overnight.
lubrication. If lubrication is necessary, turn in the camera
set for repair. Check the condition of the camera set
after each assignment; clean all parts as soon as
3-11.
Operation in Maritime, High Altitude, Low
possible. When storing the equipment, cover with water-
Temperature, or Rainy Regions
repellent material and add desiccant, if available, to
absorb moisture.
To prevent corrosion from salt-laden air or saltwater
spray and rusting from moisture when the camera set is
3-8
