TM 5-3610-295-13&P-1
4-29. PHOTOTYPESETTER ASSEMBLY. - Continued
f. Repair. (See Figures 4-32, 4-33, 4-34, and 4-35. ) Repair of the phototypesetter assembly consists of replacing
components of the mounting assemblies. For operation and repair of the phototypesetter assembly, refer to TM 5-3610-
302-12 and 20P.
This task covers:
a. Inspect
b. Replace
INITIAL SETUP
Tools
General mechanics automotive kit, Hand blind rivet
Materials
None
a. Inspect. (See Figure 4-36.)
(1) Check editorial room roadside wall processor (1) for security of mounting and proper operation. Refer
to TM 5-3610-302-12.
(2)
Check processor power cord for damage.
(3)
Check processor shelf (2) for security and damage.
b. Replace. (See Figure 4-36.)
(1)
Disconnect processor power cord (3).
(2)
Remove thumbscrews (4) and lockwashers (5) from processor (1).
(3)
Disconnect tubing (6) from processor.
(4)
Remove processor (1) from shelf (2).
(5)
Remove processor shelf rivets (7) by drilling or chiseling off heads and remove shelf (2).
(6)
Remove screws (8), lockwashers (9), and brackets (10).
(7)
Install brackets (10), lockwashers (9), and screws (8) on replacement processor (1).
(8)
Secure shelf (2) to shelter wall with rivets (7).
4-89
