TM 5-3610-295-13&P-1
4-29.
PHOTOTYPESETTER ASSEMBLY. - Continued
c.
Replace Table Top Keyboard Terminal. (See Figure 4-33.)
(1) Remove screws (1) and cable clamps (2) from keyboard terminal cable (3) and disconnect cable from rear of
controller.
(2) Remove screws (4), lockwashers (5) and flat washers (6) from bottom of table top (7) and remove keyboard
terminal (8).
(3)
Align replacement keyboard terminal with holes in table top (7) and install flat washers (6), lockwashers
(5) and screws (4).
(4) Connect keyboard terminal cable (3) and install cable clamps (2) with screws (1).
