TM 5-3610-295-13&P-1
4-18. VERTICAL CAMERA AND MOUNTING ASSEMBLY. - Continued
b. Replace. - Continued
(2)
Vertical Camera Vacuum Pump. (See Figure 4-11.)
(a) Disconnect vacuum pump power cord (1).
(b) Disconnect vacuum hose (2).
(c) Remove bolts (3), lockwashers (4), flat washers (5), and vacuum pump (6).
(d) Remove screws (7), lockwashers (8), flat washers (9), and brackets (10) from vacuum pump
(6).
(e) Install mounting brackets (10) on replacement vacuum pump (6) and secure with flat washers
(9), lockwashers (8), and screws (7).
(f) Position replacement vacuum pump (6) and secure with flat washers (5), lockwashers (4), and
bolts (3).
(e) Connect vacuum hose (2) and vacuum power cord (1).
