TM 5-3610-295-13&P-1
This task covers:
a. Inspect
b. Replace
INITIAL SETUP
Tools
General mechanics automotive tool kit
Materials
None
a. Inspect. (See Figure 4-9.)
(1)
Check darkroom PMT processor (1) for security and completeness in accordance with commercial
manual.
(2)
Check processor shelf (2) for security and general condition.
b. Replace. (See Figure 4-9. )
(1)
Disconnect power cord (3).
(2)
Drain chemicals from chemical tray (4).
(3)
Lift processor rollers (5) from chemical tray (4).
(4)
Release snaps (6) and remove motor module (7) from chemical tray (4).
(5) Remove thumbscrews (8) and lockwashers (9) and remove chemical tray (4) and mounting plate
(10) from processor shelf (2).
(6)
Remove screws (11) from mounting plate (10) and remove chemical tray (4) from mounting plate
(10).
(7)
Remove processor shelf (2) from interior wall of darkroom by drilling out rivets (12) or chiseling off
heads.
(8)
Install replacement processor shelf (2) with rivets (12).
(9)
Install chemical tray (4) to mounting plate (10) with screws (11).
(10) Install mounting plate (10) to processor shelf (2) with thumbscrews (8) and lockwashers (9).
(11) Position motor module (7) on chemical tray (4) and secure by pressing snaps (6).
4-38
