TM 5-3610-294-13&P
2-13. ASSEMBLY AND PREPARATION FOR USE. -Continued
(8)
Ceiling light assemblies. Refer to Figure 2-13 and remove ceiling light assemblies (1) from their ceiling
storage brackets (2) by rotating safety release bracket (3) and sliding the light assembly over the button to
allow the assembly to drop from its mounting stubs. Install the lights onto the expanded shelter section
ceilings. Connect electrical cord from each light assembly to the ceiling receptacles. Light storage
locations (4) are shown in Figure 2-13.
NOTE
The third storage location from the personnel door also has a safety release button which must be pressed.
Figure 2-13. Ceiling Light Assemblies, Stored Location
(View Looking up at Ceiling)
2-24
