TM 11-7025-232-10
2-13. PREPARE VFU PUNCHED TAPE (CONT)
5. Place tape on sprocket teeth.
6. Make sure one of the solid vertical
l i n e s on the tape is in line with
t h e registration mark on the front
of the punch.
7. Lower holddown arms.
8. Rotating tape control knob, move
t a p e to the desired line.
9 . Using numbered slots for direction,
p o s i t i o n punch at the desired
channel.
10. Press punch button firmly.
11. Repeat steps 8 thru 10 to punch any
other VFU tape holes.
12. Lift holddown arms.
13. Move punch to "S" position.
14. Remove VFU tape from tape punch.
2-27
