TM 11-7025-210-23
4-50.
REMOVE/REPLACE PHOTOCELL ASSEMBLY (CONT)
4. Replace adjustment screw and spring.
5. Replace top screw and washers.
6. Turn adjustment screw until top screw is in center of
slot.
7. Tighten top screw until head just touches top of
assembly.
8. Replace toggle assembly (para 4-45).
9. Replace print belt (para 4-57).
10. Push on plate.
11. Tighten screws.
12. Adjust photocell assembly (para 4-51).
13. Close up line printer (para 4-18, steps 3-8).
14. On control panel, press TEST button.
4-121
