TM 11-7025-210-23
4-48.
LUBRICATE RIBBON DRIVE ASSEMBLY
INITIAL SETUP:
Common Tools
Materials/Spare Parts
Tool kit
Freon-TF
Small brush or swab
SAE lOW-20W-40 motor oil
Lubriplate #630-AAME-D6A3 grease
Remove
1. Remove ribbon drive assembly (para 4-47).
2. Using Freon-TF, clean dirt or dried grease from all
gears with a small brush or swab.
3. Rotate all gears so all areas of gears can be
cleaned.
4. Apply two drops of oil on drive shaft just above gear
clutch assembly.
5. Lightly coat all gear teeth with grease.
6. Lift up bottom of drive spring and apply two drops of
oil on drive shaft just above bushing.
Replace
1. Replace ribbon drive assembly (para 4-47).
4-116
