TM 11-6720-239-35
1
Capacitor (C1)
1
3
Resistor (R8)
2
Capacitor (C2)
1
4
Transistor (Q1)
3
Capacitor (C3)
1
5
Transistor (Q2)
4
Capacitor (C4)
1
6
Photocell (V1)
5
Capacitor (C5)
1
7
Flexible circuit assembly (A60)
6
Variable resistor (R1)
1
8
Flexible circuit insulator (P/O A60)
1
9
7
Resistor (R2)
Electronic mounting board insulator (E16)
8
Variable resistor (R3)
2
0
Oval head rivets
9
Resistor (R4)
Flash compensating common-contact (P/O S6)
2
1
10
Resistor (R5)
2
2
Flash compensating upper-contact (P/O S6)
11
Resistor (R6)
Flash compensating lower-contact (P/O S6)
2
3
12
Resistor (R7)
Electronic mounting block (MP167)
2
4
(12) Drill out the two focus bar rivets (18),
rivet (28) and remove the detent slide (29) and
and lift out the focus bar assembly (27 through
the inner frame top (30).
38).
(17) If it is necessary to remove the right
(13) Remove the right focus bar sleeve (19)
and left focus buttons (34 and 35), lift off the
and the right focus bar washer (20).
zone focus plate (31) and focus bar plate (32)
(14) Remove the left focus bar sleeve (21)
and drill out the two focus buttons rivets (33).
and the left focus bar bushing (22).
(18) If necessary, drill out the two rivets
(15) Slide off the detent slide spring (27).
(36) and lift the focus bar bracket (37) off of the
(16) If necessary, drill out the detent slide
focus bar (38).
Located in back of manual.
3-8
