TM 10-3610-203-14
Figure
5-10. Duplicating Machine Mounting Points.
WARNING
The duplicating machine weighs approximately 650 pounds (295 kilograms). Extreme care should
be taken in handling the machine to prevent injury to personnel and damage to other equipment in
the shelter.
(7)
Carefully remove duplicating machine from shelter.
(8)
Remove the screw and washer attaching upper support bracket to duplicating machine and remove
bracket.
(9)
Remove screw, washer and nut attaching lower support bracket to duplicating machine and remove
bracket.
(10)
Install the left and right side machine covers.
(11)
Position ejector roller and roller bearing and install bearing stud and attaching nut and lockwasher.
(12)
Tag and disconnect stacker lamp switch wires from duplicator vacuum pump switch and remove wires.
c.
Installation.
(1)
Remove the left register board cover panel immediately above cabinet doors of replacement duplicating
machine.
(2)
Modify removed cover panel as shown in figure 5-11.
5-16
