TM 10-3610-203-14
(k)
Remove nut (2), lockwasher (3) and bearing stud (4) from right end of ejector roller (1). Remove
roller.
(I)
Remove screws (6, figs. 5-5 and 5-6), washers and nuts attaching straps (7) connecting stacker and
duplicating machine and remove straps.
(m)
Remove screw (8, fig. 5-5), washer (9) and nut (10)attaching end cap (11) to duplicating machine.
(n)
Remove upper stacker mounting screws (see fig. 5-8) from both sides of duplicator and carefully
remove stacker.
TS 3610-203-14/5-8
Figure 5-8. Receding Stacker Upper Mounting Screws
(4)
Remove the screws and washers attaching the duplicator upper and lower support brackets to the shelter
wall. (See fig. 5-9).
5-14
