TM 10-3610-203-14
(c)
Remove pins (2) attaching upper left cover (3) and remove cover.
(d)
Remove pins (1, fig. 5-6) attaching upper right cover (2) and remove cover.
Figure 5-6. Receding Stacker Right Side.
(e)
Tag and disconnect electrical wires from infrared lamp switch (3).
(f)
Loosen knob (4) to release infrared lamp fixture and carefully remove fixture.
(g)
Remove duplicating machine right side cover (5).
(h)
Remove duplicating machine left side cover (4, fig. 5-5).
(i)
Pull out on speed control knob (5) to disengage extension shaft slot from speed control.
(j)
Remove screw attaching pin bearing in right-hand end of ejector roller (1, fig. 5-7).
5-12
