TM 10-3610-202-14
b.
Removal. Remove the fluorescent lamp
switches as follows:
(1)
Position the LIGHTS circuit breaker to off.
(2)
Remove the two screws that secure the
switchbox cover to the switchbox and remove the cover.
(See fig. 4-34.)
Figure 4-34. Fluorescent Lamp Switches, Removal and Installation
(3)
Remove the two capscrews that secure
the switch in the switchbox, and pull the switch from the
switchbox.
(4)
Tag and disconnect the wires from the
switch.
c.
Installation. Install the replacement light switch
as follows:
(1)
Connect the wires to the switch and
remove the tags.
(2)
Install the switch in the switchbox and
secure it in the switchbox with two capscrews.
(3)
Install
the
switchbox
cover
on
the
switchbox and secure it with two screws.
(4)
Position the LIGHTS circuit breaker to the
ON position.
Section XXVIII. MAINTENANCE OF EQUIPMENT RECEPTACLES
4-60. General.
Equipment receptacles are located in the conduits on
both left and right walls of shelter. The receptacles are
used as a power supply source for the electrical
components used in conjunction with the shelter. The
receptacles may also be used as convenience outlets.
4-57
