TM 10-3610-202-14
missing parts and security of installation.
b.
Removal
If
inspection
indicates
that
replacement of the cabinet is necessary, remove the
unit as follows:
(1)
Remove content retaining rods and shelf
c.
Installation
Install
replacement
cabinet
assembly as follows:
(1)
Position cabinet against left-hand shelter
wall and align cabinet holes with mounting nutplate
holes.
(2)
Support cabinet and install bolts, washers
and nuts which attach the cabinet rear panel to the
shelter wall.
d. Repair. Repair of the wall cabinet assembly
includes replacement of door handle, latch mechanism,
door and hinge assemblies, and minor repair of shelf
content retainers.
(1)
Door handle replacement. Replace door
handle as follows:
(a)
Loosen locking screw which secures
contents from cabinet.
(2)
Support the cabinet and remove the bolts,
washers and nuts which attach the cabinet rear panel to
the shelter wall mounting points. (See fig. 4-1.) Remove
the cabinet.
handle and center rod assembly to the latching
mechanism inside right-hand door.
(b)
Withdraw handle and remove handle
spacer.
(c)
Position spacer over replacement
handle assembly center rod and insert rod through door
and into latching mechanism.
(d)
With handle pointing down and with
latch mechanism in locked position, tighten locking
screw.
(2)
Latch mechanism replacement. Replace
latch mechanism assembly as follows:
(a)
Loosen locking screw which secures
handle and center rod assembly to the latching
mechanism inside right-hand door.
4-29
Figure 4-11. Wall Cabinet, Removal and Installation
