TM 10-3610-202-14
a.
Inspection Inspect the file cabinet assembly as
follows:
(1)
Inspect cabinet for dents or cracks and
any other signs of structural damage.
(2)
Inspect welded areas for breaks or
separation of weld seams.
(3)
Inspect drawer handles for security of
installation and damage. Repair or replace as
necessary.
(4)
Inspect label holders for security of
installation and damage. Repair or replace as
necessary.
(5)
Inspect locking bar for bending or any
other damage. Repair or replace as necessary.
(6)
Inspect paintwork for any signs of peeling
or cracking and check cabinet for evidence of
environmental damage.
(7)
Inspect cabinet assembly for security of
mounting.
(8)
Inspect locking clips for breaks or other
damage.
b.
Removal.
If
inspection
indicates
that
replacement of the file cabinet is necessary, remove the
unit as follows:
(1)
Remove locking bar from upper and lower
clips.
(2)
Remove all drawers from cabinet.
(3)
Remove the four bolts which attach the
cabinet shell to the nutplates welded to the lefthand
exterior shelter wall.
Figure 4-8. File Cabinet, Removal and Installation
4-25
