TM 10-3610-202-14
Figure 5-5. Light Table Assembly
a.
Removal. Remove the light table assembly as
follows:
(1)
Remove four wingnuts and washers that
secure the light table assembly to the light table shelf
and remove the light table assembly from the shelter.
(2)
Open the light table cover assembly and
remove the four nuts and washers that secure the
mounts to the bottom of the light table assembly and
remove the mounts.
b.
Installation. Install the light table assembly as
follows:
(1)
Match drill four holes in the bottom of the
light table assembly and install previously removed
mounts on light table assembly and secure with four
nuts and washers.
(2)
Position light table assembly on light table
shelf and secure with four wingnuts and washers.
5-10. Light Table Shelf.
The light table shelf is of sheet metal construction and is
located on the left-hand wall of the shelter next to the
platemaker; it supports the light table assembly.
a.
Inspection. Inspect the light table shelf for
security of attachment and general condition. Replace
as necessary.
b.
Removal. Remove the light table shelf as
follows:
(1)
Remove the four wingnuts and washers
that secure the light table assembly to the light table
shelf and remove the light table assembly. (See fig. 5-
5.)
(2)
Drill out the blind fasteners that secure the
light table shelf to the wall of the shelter. (See fig. 5-6.)
5-13
