TM 5-3610-295-13&P-2
SECTION V. UNIT TROUBLESHOOTING
4-9.
GENERAL. This section contains unit troubleshooting information for locating and correcting common
malfunctions which may develop in the press shelter.
WARNING
The press contains voltages that are dangerous if contacted. When
troubleshooting, observe all safety warnings and precautions. Make sure power
is disconnected before replacing or repairing electrical components. Failure to do
so may result in serious electrical shock or death.
If you suspect a press shelter problem, you should first verify that the PRESTART PROCEDURE in paragraph 2-8 had
been performed before continuing with UNIT TROUBLESHOOTING in table 4-3. This manual cannot list all
malfunctions that may occur, nor all tests or inspections and corrective actions possible. If a malfunction is not listed or
not corrected by listed corrective actions in this manual, then refer to commercial or Technical Manual. If at this point
you cannot correct the malfunction, notify your supervisor.
4-10.
UNIT TROUBLESHOOTING. Table 4-3 lists the common malfunctions which you may find during operation or
maintenance of the press shelter or its components. You should perform the tests or inspections and corrective actions
in the order listed.
NOTE
Before you use this table, be sure you have performed all applicable Operator and
Unite Preventive Maintenance Checks and Services (PMCS).
4-13
